← Back to Guides
Oil Sensor Delete Installation
Remove the low-oil shutdown sensor to prevent engine shutdown during hard cornering.
beginner~15 minutes
Steps
1
Locate the Oil Sensor
The oil sensor is located on the side of the engine block, near the oil fill port.
2
Disconnect the Wire
Unplug the wire connector from the oil sensor.
3
Remove the Sensor
Unscrew the oil sensor from the engine block. Be prepared for a small amount of oil to leak out.
4
Install Block-Off Plug
Install the block-off plug from your delete kit. Use thread sealant to prevent leaks.