Loading...
Complete fastener torque values for all engine components. Use a calibrated torque wrench for all installations.
Reference only; the manufacturer's current manual is authoritative when in doubt.
Use a wrench that covers the range needed (e.g. 5–80 ft-lb for most small engines). For break-in procedure, maintenance intervals, and tightening sequences, see the full manual on the engine page.
Scroll horizontally to see all columns
| Component | Torque (ft-lb) | Torque (in-lb) | Installation Notes |
|---|---|---|---|
| Cylinder Head Bolts | 14-16 ft-lb | 168-192 in-lb | Tighten in sequence (Honda spec) |
| Connecting Rod Bolts | 9-11 ft-lb | 108-132 in-lb | Critical - Honda spec |
| Flywheel Nut | 55-60 ft-lb | 660-720 in-lb | Use thread locker |
| Spark Plug | 11-13 ft-lb | 132-156 in-lb | Hand tight + 1/4 turn |
| Oil Drain Plug | 9-11 ft-lb | 108-132 in-lb | Replace crush washer |
| Carburetor Mounting Bolts | 6-8 ft-lb | 72-96 in-lb | Even pressure |
| Exhaust Mounting Bolts | 9-11 ft-lb | 108-132 in-lb | Check after first run |
| Air Filter Cover Screws | 4-6 ft-lb | 48-72 in-lb | Snug only |
| Valve Cover Bolts | 6-8 ft-lb | 72-96 in-lb | Even pattern |
Complete fastener torque values for all engine components. Use a calibrated torque wrench for all installations.
Reference only; the manufacturer's current manual is authoritative when in doubt.
Use a wrench that covers the range needed (e.g. 5–80 ft-lb for most small engines). For break-in procedure, maintenance intervals, and tightening sequences, see the full manual on the engine page.
Scroll horizontally to see all columns
| Component | Torque (ft-lb) | Torque (in-lb) | Installation Notes |
|---|---|---|---|
| Cylinder Head Bolts | 14-16 ft-lb | 168-192 in-lb | Tighten in sequence (Honda spec) |
| Connecting Rod Bolts | 9-11 ft-lb | 108-132 in-lb | Critical - Honda spec |
| Flywheel Nut | 55-60 ft-lb | 660-720 in-lb | Use thread locker |
| Spark Plug | 11-13 ft-lb | 132-156 in-lb | Hand tight + 1/4 turn |
| Oil Drain Plug | 9-11 ft-lb | 108-132 in-lb | Replace crush washer |
| Carburetor Mounting Bolts | 6-8 ft-lb | 72-96 in-lb | Even pressure |
| Exhaust Mounting Bolts | 9-11 ft-lb | 108-132 in-lb | Check after first run |
| Air Filter Cover Screws | 4-6 ft-lb | 48-72 in-lb | Snug only |
| Valve Cover Bolts | 6-8 ft-lb | 72-96 in-lb | Even pattern |